rfmor.blogg.se

How to put in tracks
How to put in tracks







how to put in tracks

If the string line is not level, then raise or lower one side. Stand back from the window and check if the string line is level to the eye and in proportion to the coving or ceiling and the window recess. To ensure the poles and tracks will be level when fixed, run a string line from one height mark to the other, secured in place with two bradawls. Measure from the floor up to the point where the bracket is to be fixed, mark this point with a cross, repeating this procedure on the other side of the window. Also check to make sure that the curtains won’t end up knocking over a table lamp or vase every time you close them. At this stage it is vital that you also make sure that the brackets aren’t going to end up vertically aligned with any pipes or electrical sockets that drilling could disrupt.

how to put in tracks

Once happy with the arrangement you have chosen, you must attach the holding brackets which should be positioned about 15cm either side of the window recess- but be sure to check that your track is wide enough before marking out and drilling. If not being positioned in the window recess, the tracks should be positioned on the wall about 10 - 15cm above the horizontal edge of the window recess, if you have a tall ceiling, halfway between the ceiling and the recess or, if working to specific ready made curtain lengths, take time to work out the actual fixing height of the brackets so your curtains hang perfectly.

how to put in tracks

Matters can get even worse if you have already thrown out the packaging and receipt, so be sure to hold onto those until the job is complete. You should also check that everything that is supposed to be included with the track is actually in attendance as it can be really frustrating to have to stop a job halfway through to nip back to the DIY store. You will need the following a metal tape measure, pencil, plumb line (or alternatively string), drill, screwdriver, dust Sheet (for the especially house proud!), step ladder, hacksaw or pipe cutters and a handful of nails and screws. Once you have your measurements and positioning correct, you can simply install your brackets, make sure it is level and then attach the tracks. As long as you ensure you have the correct tools you’ll be well on your way. It may seem like a daunting task yet it is actually pretty simply once you know how. Knowing how to put up a curtain track is an important step in installing your new curtains.









How to put in tracks